Double acting hydraulic cylind

发布时间:2009-09-20 来源:扬子工具集团 浏览次数:61302

34
B 8354.1992
10.1 Test conditions When the test conditions are not available。these shall be
determined upon agreement between the purchaser and supplier.
10.1.1 0il for tests
32 0r VG 46 0f Class
 The oil for the tests shall be the viscosity grade ISO VG
2 specified in JIS K 2213.
10.2 Test methods
The oil temperature shall be 50±5。C.
10.2.1 No load operation test    In the no load operation test.set the pressure of
the test circuit to the minimum operating pressure,and carry out running at the
minimum speed of Table l over the total stroke not applying any load to the
cylinder.The speed control of the cylinder shall be the meter.in circuit or bleed.
off circuit which restricts the supply side.
10.2.2 Durability test ’The durability test shall be carried out under the oper-
ating conditions of Table 33.Each part of the sample cylinder shall not be ad-
justed during the test.
    As t0,the switch,its electric circuit shall be operated at each sensing of the
piston.
Table 33.Conditions of durability test

 Travelling distance of piston
 500kmmin.
Speed of piston
 The maximum speed ofTable l±10%
Internal pressure of cylinder
 
 
 
 The oil hydraulic circuit shall be of back pressure
 restriction,and the internal pressure of cylinder
 at supply side shall be not less than the nominal
 woring pressure.
Load mass
 
 It shall be determined in accordance with At.
tached Table l an Attached Fi9.2.

 
Remarks l.The internal pressure of the cylinder shall not exceed the
    permissible maximum working pressure during the test.
2.For the cylinder without cushionin9,the running direction
 shall be changed over in front of the cylinder—stroke end.
10.2.3,P.....r....e....s....s...u.....r....e.......r...e.....s...i...s....t...a....n.....c....e.......t...e....s.—t— Carry out the pressure resistance test by
applying a pressure of l.5 times the nominal working pressure to the head end of
the cylinder。and l.5 times the nominal working pressure or l.05 times the maxi-
mum permissible working pressure,whichever is higher,to the rod end for 2 rain
0r more.
    VV-hen the pressure is applied to the head end,the test shall be carried out
by fixing the piston at the position where the piston has just reached the rod
cover;when the pressure is applied to the rod end,the test shall be carried out
by fixing the piston at an intermediate position near the stroke end.


 

    35
王:8354.1992
10.2.4—Oil leak—age test The oil leakage test shall be made as describe i below:
(1) External oil leakage While performing the tests specified in l0.::.l,10.2.2
    and l0.2.3,measure the amount of the oil leaking from the wiper I art of the
    rod.
(2)—Internal 0—il leakage   While performing the test specified in l0.2.:;,apply
    the maximum permissible working pressure to one side of the pistc a,and
    measure the amount of the oil leaking through the piston to the ul)loaded
    pressure side.
10.2.5.T.....e....s.,..t......f...o....r......t...h......r...u.....s....t......e....ffi........c....i..e....n.....c...y—— Measure the output force at the nomi aal work--
ing pressure of a sample cylinder and calculate the ratio of it to the cyli:1der force
[Refer t0 2.Definitions(8)】.
1 1. Inspection
11.1 Type inspection The type inspection shall be carried out on the c=’linders
of new design or of remodellin9,which are considered as new design one;,for the
items enumerated below.The results shall meet the requirements of 5.·,0 8.
No loa.d operation
Durability
Pressure resistance
External oil leakage
Internal oil leakage
Thrust efficiency
Construction
Dimensions and accuracy
Appearance
Switch
11.2—Delivery i—nspection The delivery inspection shall be carried out 0‘1 the
cylinders of the same type as those which have passed the type inspectioI l and
have been ascertained as to the satisfactory performance,for the items oi(1),(4),
(9)and(10)specified in ll.1.The inspection items,however,may be par;ially
omitted,sumect to an agreement between the purchaser and supplier.
12.Designation The cylinder should preferably be designated by using the
number(or the title)of the standard,and names or symbols of materials)f pack.
m9,mounting type,tube bore,rod diameter symbol,nominal working Pre:;sure,
location and with or without cushionin9。stroke length and location of por l.HOW.
ever。as for the ones with the packing and gasket of which materials havf com.
bined seals,indicate the symbols of the rubber materials used.
)))))))))nv


 

36
B 8354.1992
Example l:
JIS B 8354 R 2 1 LA 40 8 2l N 200 A
Location of port
Location of CUShioning
and with or without
cushioning(none)
Nominal working
pressure
(21 MPa){210 k9∥cm2)
Remarks:When the material ofpiston packing and that of rod packing are the same,
   2 instead of 22 may be used.
Example 2:
    Double acting hydraulic cylinder SI SI TA l00 C 14 H 320 B
pressure
(14MPa)
13.—M——a—r—k—i—n—一9 The cylinder shall be clearly marked with the particulars
enumerated below or designation.However,those marked with asterisks may be
omitted.
(1) Name
(2)Tube bore
(3) Rod diameter
(4) Nominal working pressure
(5) Cushioning
(6)Length of stroke
(7) Class of external oil leakage宰


 

(8) Shapes of piston packing and rod packin9木
(9)Type number by manufacturer*
(10)Manufacture number
(1 1)Year and month of manufacture or their abbreviations
(12)Manufacturer’S name or registered trademark
    37
B 8354.1992
Exsmple:Double acting hydraulic cylinder-R-21 LA 40 8 21 N 200 A
    Manufacture number or year and month of manufacture l992-4
    1堪anufacturer‘S name or re西stered trademark    JISC
Attached Table l.Piston speeds to be used in durability test
The piston speeds to be used in the durability test(at an actual discharg of an
oil hydraulic pump as l00 2/rain)shall be as follows:

    Tube bore
 Test piston speed±10%
    Remarks
    32
    40
    50
    63
    400
 
 
 
 The maximum speed has been
 restricted t0 400 mm/s.
 
 
    80
    300
 
    i00
    200
    125
    130
    140
    100
    160
    80
    180
    60
    200
    50
    220
    40
    250
    30

 
Informative reference:Motor capacity of pump unit for test
    Approx.50 kW when 210 MPa(203.9 kgf/cm2}
    Approx.30 kW when l40 MPa(142.8 kgf/cms}
    Approx.15 kW when 70 MPa(71.4 kgf/cm2}


 


本文链接: http://www.yzgj.cn/yzgjcn_172.html
如需转载请注明:扬子工具液压千斤顶http://www.yzgj.cn

本文章总10页 上一页 1 2 3 4 5 6 7 8 9 10 下一页

上一篇:伸缩式套筒液压缸
下一编:液压接头和插头尺寸规范
千斤顶相关知识
缸体、活塞和活塞杆的材料
液压缸安装的注意事项
双作用单活塞杆液压缸
液体静力学
液压千斤顶定义,液压执行元件(马达)的术语
液压油缸支承衬套的材料及装配部位和装配间隙
液压千斤顶相关产品(请点击产品名称查看详细资料)
电动液压千斤顶(海力F-V50-1000T) - 同步千斤顶 - 大吨位液压顶(海力F-Q顶管机大行程) 大吨位分离式液
压顶
薄型顶(吨位5-200T行程6-80mm) - 薄型同步千斤顶(薄型海力B-V)
桥梁千斤顶(海力M-B) - 超薄型千斤顶(RSM5-150T) - 薄型千斤顶(RCS5-100T)
空间窄小-如桥梁
更换支座
穿心千斤顶(海力H-C空心顶) - 空心千斤顶(RCH穿心顶) - 双作用空心千斤顶(RRH) 具有拉伸功能空
心液压顶
自锁千斤顶(海力L-V50-1080T) - 自锁同步千斤顶 - 自锁式千斤顶(CLL) 需长时间支撑重
物液压顶
分离式千斤顶(10-200T) - 手动千斤顶(5-100T) - 双节千斤顶(多节) 小吨位分离式液
压顶
超高压千斤顶(CLR) - 电动千斤顶(DYG) - 大吨位千斤顶(CLS) 大吨位液压顶旧
型号
电动泵(海力B-V电动泵站) - 手动泵(YSB单向) - 双向手动泵(YSSB) - 单向手动泵(YCSB)
液压千斤顶选型调查表(在括号中填上数据,并留下联系方法,最后再提交)
单位:
姓名:
电话:
传真:
手机:
邮箱: