Double acting hydraulic cylind

发布时间:2009-09-20 来源:扬子工具集团 浏览次数:40712

Remarks:Nitrile rubber and fluorine.contained
    rubber include cloth-inserted rubber.
Cushioning The cushionings shall be classified as given in Table 6
according to the locations where the cushions are to be built—in,ant.with or
without thereof.
Table 6.Cushionings

 Locations where cushionings are to be
 built.in and with or without thereof
 
 Symbol
cushion.
 Rod end and head end
    B
ing
 Rodend
    R
 Head end
    H
 Without cushioning
    N

 
(5)—External oi—l leakages The external oil leakages shall be classifie4【into
    Class A,Class B and Class C as given in Fi9.4 according to the aounts of
    oil leakage from the wiper parts of the rods.
8
B 8354.1992
    As regards the request for the smaller leakage than the Class A shall
be as agreed between the purchaser and supplier.
n3
 Q2
Rod diameter d(mm)
(6)—Presence or abs—ence of switch The cylinders shall be classified as given
in Table 7 by presence or absence of the switch.
5.Performances
Table 7.Presence or absence of switch
5.1一—No load 0—peration    When tested in accordance with l0.2.1,the move—
ments of the cylinder shall be smooth.
    The value of the minimum operating pressure shall be not more than the
value of Table 8(A)or Table 8(B)being classified by the shapes of the packin9.
However,when the minimum operating pressure other than this value is re-
quired,its value may be determined as agreed between the purchaser and sup-
plier.
The shape of the packing shall be classified as given in Table 9.
9
E 8354.1992
Table 8(A)Minimum operating pressures for rod packings other than V—I acking
Unit:K Pa{kgf/cm2)

Shape of
 Nominal
When pressure
    When pressure is supplied from rod
 piston
 packing
 
 pressure
 (MPa)
 
 is supplied from
    head end
 
 
 Rod diameter
 symbolA
 
 Rod diameter
    symbol B
 
 Rod
    砖
    V
    7
    0.5(5 J
 0.98(10)
 0.74(7.5J
 0.!
 14·2l
 
 Nominal pres-
sure×6%
Nominal pres·
sure×l2%
Nominal pres—
sure×8.6%
Nomi:
SUre>
 LoUoX
    7
    0.29{3)
    0.59{6)
    0.44【4.5)
    0.
    OoS
 
 14.21
 
 Nominal pres-
sure×4%
Nominal pres-
sure×8%
Nominal pres-
sure×5.7%
Nomi:
SUl.e≯
    P
    7
    0.1{1 J
    0.2{2)
    0.15(1.5J
    0.:
14021
 
 Nominal pres-
sure×1.5%
Nominal pres·
sure×3%
Nominal pres·
sure×2.1%
Nomi:
8Ure>(

 
Table 8(B)Minimum operating pressures for rod packings of V—packing
end

Shape of
 Nominal
When pressure
    When pressure is supplied from rod
 piston
 packing
 
 pressure
 (MPa)
 
 is supplied from
    head end
 
 
 Rod diameter
 symbolA
 Rod diameter
 
    symbol B
 Rod
 
    sy7
    V
    7
 0.74{7.5)
 1.5{15)
 1.1{11)
    0.9
 14021
 
 Nominal pres-
sure×9%
Nominal pres·
sure×l8%
Nominal pres-
sure×13%
Nomin
 8Ure×
 L·Uox
    7
 0.44{4.5】
    0.9{9】
    0.64(6.5)
    0.5—
    OoS
 
14.21
 
 Nominal pres-
sure×6%
Nominal pres-
sure×12%
Nominal pres-
sure×8.5%
Nomin
 SUl’e×
    P
    7
 0.15{1.5)
    0.3(3)
    0.2(2)
    0.1.
14021
 
 Nominal pres-
sure×2.5%
Nominal pres·
sure×5%
Nominal pres—
sure×3.5%
Nomin
 SUl.e×

Remarks: Minimum operating pressures for piston rod symbols X,Y and Z CC譬espond
    t0 1.6,1.33 and l.2 times,respectively,of minimum operating pres;1lre
    when the pressure is supplied from the head end.
Table 9.Shapes of packings

 Shape of
 
 packing
    V
 
 packing
 L(J)
 
packing
 U∞
 
packing
    X
 
 rmg
    O
 
 rmg
    -
 .C.ombin两d
 seal
 Piston
 
 rmg
 Symb01
    V
    L
    U
    X
    O
    S·
    P

 
Others
E
Remarks l.0-rings shall be in accordance、Jl,ith JIS B 2401 and V-packings sh fil be in
    accordance with JIS B 2403.
2.
The combined seal means the packing which is formed by the com!dnation
of sliding rings of ethylene tetrafluoride resin or the like with rubt er
0一rings or the like.


 

10
B 8354.1992
5.2—Dura—bility When tested in accordance with l0.2.2,there shall be no
loosenin9,permanent deformation and abnormal wearin9,and for the cylinder
with cushionin9,the cushioning shall operate normally.
    For the cylinder with switch,the switch shall not cause erroneous actions.
5.3
n0
 Pressure resistance When tested{n accordance
loosenin9,permanent deformation and breakages on
with l0.2.3,there shall be
parts.
5.4.1—External 0—il leakage The external oil leakage,when tested in accordance
with l0.2.4(1),shall be expressed by the total amount of the oil leakage from the
wiper part of the rod within l00 m in travelling distance of the piston(see Fi9.
4).
    Further,there shall be no external oil leakage from any place except the
wiper part of the rod.
、阮en tested in accordance
amount of internal oil leakage of the cylinder not using
more than the value舒yen in Table l 0。
with l0.2.4(2),the
a piston ring shall be not
 

本文链接: http://www.yzgj.cn/yzgjcn_172.html
如需转载请注明:扬子工具液压千斤顶http://www.yzgj.cn

本文章总10页 上一页 1 2 3 4 5 6 7 8 9 10 下一页

上一篇:伸缩式套筒液压缸
下一编:液压接头和插头尺寸规范
千斤顶相关知识
液压缸安装的注意事项
齿轮泵
液体动力学
液压大钳
钻杆动力钳使用说明书
液压缸掌握原始资料和设计依据
液压千斤顶相关产品(请点击产品名称查看详细资料)
电动液压千斤顶(海力F-V50-1000T) - 同步千斤顶 - 大吨位液压顶(海力F-Q顶管机大行程) 大吨位分离式液
压顶
薄型顶(吨位5-200T行程6-80mm) - 薄型同步千斤顶(薄型海力B-V)
桥梁千斤顶(海力M-B) - 超薄型千斤顶(RSM5-150T) - 薄型千斤顶(RCS5-100T)
空间窄小-如桥梁
更换支座
穿心千斤顶(海力H-C空心顶) - 空心千斤顶(RCH穿心顶) - 双作用空心千斤顶(RRH) 具有拉伸功能空
心液压顶
自锁千斤顶(海力L-V50-1080T) - 自锁同步千斤顶 - 自锁式千斤顶(CLL) 需长时间支撑重
物液压顶
分离式千斤顶(10-200T) - 手动千斤顶(5-100T) - 双节千斤顶(多节) 小吨位分离式液
压顶
超高压千斤顶(CLR) - 电动千斤顶(DYG) - 大吨位千斤顶(CLS) 大吨位液压顶旧
型号
电动泵(海力B-V电动泵站) - 手动泵(YSB单向) - 双向手动泵(YSSB) - 单向手动泵(YCSB)
液压千斤顶选型调查表(在括号中填上数据,并留下联系方法,最后再提交)
单位:
姓名:
电话:
传真:
手机:
邮箱: